Important Safety Instructions - Salamander Designs FPS Serie Manual De Uso

warnings [English]

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS FURNISHING
When using an electrical furnishing, basic precautions should always be followed, including the following:
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
DANGER – To reduce the risk of electric shock: Always unplug furnishing from the electrical outlet before
cleaning
WARNING! Failure to comply with these instructions may result in accident involving serious personal
injury. Failing to follow these instructions can result in the product being damaged or being destroyed or
voiding of the warranty.
WARNING! For use with video monitors weighing 175lbs (80kg) or less. Use with heavier televisions
may result in instability causing tip over resulting
in death or serious injury.
WARNING – Keep hands away from moving parts while operating device.
CAUTION! Manage cables carefully. Use cable ties to keep wires away from moving parts.
WARNING – Keep children away from moving parts and Monitor.
CAUTION! When relocating the device, set to lowest position and use handle to move
and position the device.
• Unplug from outlet before putting on or taking off parts.
• Close supervision is necessary when this furnishing is used by or near childern,invalids, or disabled
persons
• Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
• Never operate this furnishing if it has a damaged cord or plug,if it is not working properly,if it has
been dropped or damaged,or dropped into water. Return the furnishing to a service center for
examination and repair.
• Keep the cord away from heated surfaces
• Never operate the furnishing with the air openings blocked. Keep the air openings free of lint,hair
and the like.
• Never drop or insert any object into any opening
• Do not use outdoors
• Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
• To disconnect,remove plug from outlet
• For Commercial Use Only
• Disconnect power when installing,relocating or before servicing
• Protect the power cord from being walked on or pinched
• If the device makes unusual noise or smells, switch off the main voltage immediately. Return the
device to a service center for examination and repair.
Electrical Specifications:
Input: 100 - 240V ~, 450W- 60HZ
Operation: Output 24 VDC - 8A
Salamander Mobile Interactive Display Stands
Weight Capacities:
Max Load: FPS1/EL - 175 lbs (80kg)
501-675 [10.17] page 3 of 24