Other Functions - Velleman VTBAL22 Manual Del Usuario

 Familiarise yourself with the functions of the device before actually
using it.
 All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
 Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
4. Operation
4.1 Preparation
 Open the battery compartment at the back of your scales and
insert both batteries. Mind the polarity. Make sure the cover is
placed on the scales.
Warning: Do not puncture batteries or throw them in fire as
they may explode. Do not attempt to recharge non-
rechargeable batteries (alkaline). Dispose of batteries in
accordance with local regulations. Keep batteries away from
children.
4.2 Calibration
 Remove the lid and press the ON/TARE button. The VTBAL22 will
display "0.0" and "g" meaning the weighing unit is grams. If not,
press the CAL/MODE button until it does.
 Hold the CAL/MODE button pressed (± 3 s) until "CAL" appears on
the display. Release the CAL/MODE button.
 Press CAL/MODE button again, "CAL" will flash, followed by the
standard calibration weight (20 g, 40 g or 100 g).
 Place the indicated standard calibration weight onto the weighing
platform.
 Wait a couple of seconds until "PASS" is displayed. The scales are
now calibrated and ready for use.
4.3

Other Functions

 Press the CAL/MODE button to choose the weighing unit: g
(grams), oz (ounces), ozt (troy ounces), dwt (pennyweight), ct
(carats), grain and tl (tael).
V. 02 – 04/10/2016
VTBAL22
3 ©Velleman nv