Dismantling, Storage And Transport; Dismantling; Storage; Transport - zarges Z600 Manual De Instrucciones

6. Dismantling, storage and transport

6.1 Dismantling

• The prescribed order for dismantling as shown in the illustrations must be ob-
• At least two persons are required to dismantle the platform.
D
S
Observe the following when dismantling the work platform:

6.2 Storage

• Store components in such a way that they cannot be damaged.
• Store components in a location where they are protected from the elements, and

6.3 Transport

• Never transport the work platform while it is still assembled.
• Dismantle the work platform (see "6.1 Dismantling") and pack it for transport.
• Never use forklift trucks or towing equipment to transport the work platform.
• Secure components with a strap to prevent them sliding around or falling during
• Never throw components during loading or unloading.
For instructions on moving the work platform,
see the illustrations section of this manual.
served.
ANGER
ERIOUS OR FATAL INJURY MAY RESULT IF THE WORK PLATFORM TOPPLES OVER
> Press down the brake lever on the swivel castors to prevent the platform rolling
away during dismantling.
> Do not climb on the work platform during dismantling, as it is only stable when
fully assembled.
For instructions on dismantling the work plat-
form, see the illustrations section of this manual.
if possible, store them laid flat.
transport.
!
21