Manual Buttonhole - Sears Kenmore 385.17628 Manual De Instrucciones

Manual Buttonhole
(_ Stitch width:
(_) Stitch length:
Needle thread tension:
(_ Presser foot B:
3 to 6,5
Blue zone
2to6
Buttonhole foot
_ WIDTH
_ LENGTH
®
,, Manual Buttonhole
'_: If the diameter of the button is more than 1" (2.5
cm), a buttonhole must be made manually as
follows:
[] Turn the handwheel toward you to raise the
needle to its highest position, Raise the presser
foot lifter,
[] Set the stitch at " I] " by turning the stitch
selector.,
'_' If the stitch is already on at" H ", reset the
machine in accordance with the instructions on
page 76,
[] Attach the buttonhole foot (B).
[] Pull the buttonhole lever downward as far as it
will go_
[] Lower the needle into the garment where the
buttonhole is to start, and lower the foot.
[] Sew the front bartack and left row, then stop the
machine after sewing the desired total length of
buttonhole,,
Pull the buttonhole lever toward you,
[] Sew the back barrack and right row, then stop
the machine at the starting poinL
_' To cut the opening and to reset for sewing the
next buttonhole, refer to the instructions on page
76.
f
_%_
f
[][]
i
.... J
82