Wear Parts; Correct Disposal Of This Product; Guarantee Conditions - Pontec PondoAir Set 1200 LED Instrucciones De Uso

Ocultar thumbs Ver también para PondoAir Set 1200 LED:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
Cleanfilter
How to proceed:
 D
1. Unscrew the lid by turning counterclockwise and remove (bayonet closure).
2. Lift out the LED unit and remove.
– Carefully lift the air hose out of the recess.
3. Remove the bag containing bio balls.
4. Remove the filter foam.
5. Remove the filter basket.
6. Clean all parts.
7. Remove and clean the pump. (→ Replacing the impeller unit)
8. (→ Replacing the impeller unit)
Replacing the impeller unit
How to proceed:
 E
1. Lift out the pump.
2. Pull the filter housing from the pump housing (bayonet closure).
3. Take out the impeller unit and clean or replace. Please see picture E for detail.
4. For replacing the pump it must be replaced and provided by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
5. For replacing the LED lamp it must be replaced and provided by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
6. Reassemble the unit in the reverse order.

Wear parts

• Impeller unit
• Foam filter
Storage/Over-wintering
Remove the unit at temperatures below zero degrees centigrade. Thoroughly clean the unit, check for damage and
store immersed in water in a frost-free environment. Do not immerse the plug!

Correct Disposal of this product

N O T E
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.

Guarantee conditions

PfG grants a 2 year guarantee from the date of sale on proven material and manufacturing faults. Prerequisite for our
guarantee is the presentation of the purchase receipt. Our guarantee will become null and void if the unit is misused,
electrically or mechanically damaged by inappropriate use and improper repair by non-authorised workshops. Repairs
are reserved for workshops authorised by PfG or by PfG itself. In the case of warranty claims, please return the defec-
tive unit or part freight paid to PfG together with a description of the fault and the purchase receipt. PfG reserves the
right to invoice repair costs. PfG is not liable for transport damage. Any damage must be claimed against the carrier.
Further claims of whatever type, especially consequential damage, are excluded. This guarantee does not affect the
final customer's claims against the dealer.
- EN -
13

Publicidad

Tabla de contenido
loading

Tabla de contenido