Pontec PondoSolar 250 Plus Instrucciones De Uso página 12

- EN -
Start-up
Operation
Description
Water flow Control knob for setting the pump flow rate.
– Setting is only possible in the mode "Battery powered".
ON For switching on the unit
OFF
For switching off the unit
Mode For selecting the operating mode
Solar powered
Operating mode display
Battery powered
Operating mode display
Charging Charging process display
Low battery Battery storage capacity display.
12
LO
water flow
Solar
powered
ON
Battery
powered
Charging
OFF
Low battery
HI
Mode
Function
To reduce: Turn the control knob towards "LO".
To increase: Turn the control knob towards "HI" .
The unit starts in the mode "Solar powered".
The unit is deactivated.
Solar powered:
– The pump is powered by the solar module.
– Any surplus power is used for charging the rechargeable
battery.
– The LED lighting is deactivated.
Battery powered:
– The pump and LED lighting are powered by the battery.
– The LED lighting switches on automatically when it is suffi-
ciently dark.
– The unit switches off automatically after approx. 4 hours.
LED is lit: Operating mode active.
LED is lit: Operating mode active.
LED flashing: Battery is being charged.
LED off: Battery is not being charged.
LED flashing: Low battery: the battery is discharged beyond
the limit.
– The pump and LED lighting switch off.
– Charge the battery for at least 3 hours.
LED off: The battery is no longer discharged beyond the limit.
– The pump and LED lighting switch on.
PSO0010