Care And Maintenance; Parts And Accessories - Weller WXP 65 Manual De Uso

Care and maintenance

Soldering iron: Only replace the soldering tips when they are cold.
The soldering tool must be left switched off in the safety rest for at least 3 minutes until the soldering tip
has cooled down. The LED status indicator must be at „OFF".
Keep the heat transfer surfaces of the soldering tip and heating element clean. The heating element must
not come into contact with soldering tin.

Parts and accessories

Soldering tool
Soldering WXP 65
iron
WXP 120
WXP 200
WXMP
Desoldering WXMT
tweezers
Desoldering WXDP 120
iron
20
Order no. Description
T0052921199 WXP 65 Soldering iron
T0051512199 Safety rest WDH 10
T0051384199 Steel wool for cleaning insert for WDC 2
T0052920199 WXP 120 Soldering iron
T0051512199 Safety rest WDH 10
T0051384199 Steel wool for cleaning insert for WDC 2
T0052920599 WXP 200 Soldering iron
T0051515899 Safety rest WDH 31
T0051384199 Steel wool for cleaning insert for WDC 2
T0058741753 17 mm open end wrench
T0058765706 Handpiece WXMP with cable
T0051517199 Safety rest WDH 51
T0054460399 RT 3 soldering tip 40 W
T0058751816 Clip which attaches to the side of the safety rest
and holds two RT tips
T0051384199 Steel wool for cleaning insert for WDC 2
T0058765707 Handpiece WXMT with cable
T0051516999 Safety rest WDH 60
T0054465299 RTW 2 Soldering tip pair 0,7 x 0,4 mm, 45°
T0051384199 Steel wool for cleaning insert for WDC 2
T0051320199 WXDP 120 Desoldering iron
T0051517299 Safety rest WDH 70
T0051384199 Steel wool for cleaning insert for WDC 2
T0051312499 Service set DSX
T0058765772 Tip cleaner WXDP/DSX 120
T0058765773 Cleaning set WXDP/DSX 120