Safety; General Safety Instructions; Recommendations; Specific Safety Instructions - BRÖTJE KB1B SGB E Serie Instrucciones De Montaje

en

1 Safety

1 Safety
1.1

General safety instructions

1.2

Recommendations

1.3

Specific safety instructions

12
Caution
There is a risk of significant material damage
when installing the accessories. Accessories
must therefore only be installed by trained
contractors and commissioned by a competent
person appointed by the system installer.
Accessories used must correspond to the
technical regulations and be approved by the
manufacturer in combination with these
accessories.
Caution
Only genuine spare parts may be used.
Danger
Risk of death due to modifications to the boiler!
Unauthorised conversions and modifications to
the boiler are not permitted, as these can put
people at risk and cause damage to the boiler.
Failure to comply with these instructions renders
the approval for the boiler void.
Cascade kit KB1 SGB E is designed to route together
the flow and return connections from two gas-fired
condensing boiler series Eurocondense 125 kW-215
kW with the same output.
Cascade kit KB2 SGB E is designed to route together
the flow and return connections from two gas-fired
condensing boiler series Eurocondense 260 kW-300
kW with the same output.
See
assembly instruction of the gas condensing
The
boiler used must be followed.
Danger
Risk of injury from falling heavy loads! Persons
taking part in transportation must wear protective
gloves and safety shoes!
7306084 - 06 - 07042020