Fitting Advice; Using The Adjuster Screw; Bonding A Cosmesis - Blatchford SuperSACH Instrucciones De Uso

7 Fitting Advice

Symptoms
• Sinking at heel strike
• Rapid transition from heel
strike through stance phase
• Difficulty controlling heel
action (e.g. foot jars into mid-
stance)
• Foot feels too rigid

Using the Adjuster Screw

The adjuster screw is used to adjust the hardness of the heel cushion.
Note:
Users who weigh between 100 kg and 125 kg may need maximum heel hardness.
Users who weigh 60 kg or less may need minimum heel hardness.
To harden the heel cushion:
Turn the adjuster screw clockwise.
•
Note:
The heel cushion is set to maximum
hardness when the screw is fully engaged.

8 Bonding a Cosmesis

Before you begin
Lightly abrade and clean the mating surfaces with a suitable solvent cleaner.
For instructions
on fitting a
cosmesis.
938097
Reason Action
Heel too soft Harden the heel cushion
Heel too hard Soften the heel cushion
To soften the heel cushion:
• Turn the adjuster screw
counterclockwise.
Note:
The heel cushion is set to minimum
hardness after 4 counterclockwise turns from
the maximum hardness setting.
926213
926204
6
Use a contact
adhesive — Evo
Stik 528, Thixofix
or an equivalent.
938086/8-0819