Emission Levels - Festool T 12+3 Manual De Instrucciones

1.3

Emission levels

Levels determined in accordance with EN 60745 are
typically:
Sound pressure level
Sound power level
Uncertainty
Wear ear protection.
Vibration emission value a
rections) and uncertainty K measured in accordance
with EN 60745:
Drilling in metal
Screwing
The specified emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
3 Technical data
Cordless drill
Motor voltage
Idling speed*
Max. torque
Adjustable torque**
Chuck clamping range
Max. drill diameter in
Tool holder in drill spindle
Weight without battery, with Centrotec
Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging, intermittent (NiCd, NiMH)
Charging times for BP, BPS and BPC battery packs
Li-ion 1,5 Ah, 80 %/100 %
Li-ion 3,0 Ah, 80 %/100 %
L = 65 dB(A)
PA
L = 76 dB(A)
WA
K = 3 dB
(vector sum for three di-
h
a < 2,5 m/s
h
K = 1,5 m/s
a < 2,5 m/s
h
K = 1,5 m/s
2nd gear
Soft material (wood)
Hard material (metal)
1./2. gear
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
2 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
2
Wear ear protection.
2
2
Wear protective gloves.
2
Wear protective goggles.
Do not throw in the household waste.
T12 + 3
10,8 - 12 V
1st gear
20 Nm
34 Nm
wood 25 mm
metal 14 mm
1,0 kg
T 12 + 3, T 15 + 3, T 18 + 3
T15 + 3 T18 + 3
14,4 - 15,6 V 18 V
0 - 450 rpm
0 - 1500 rpm
27 Nm 30 Nm
40 Nm 45 Nm
0,5 - 8 Nm
1,5 - 13 mm
35 mm 45 mm
16 mm 16 mm
1/4 ''
1,0 kg 1,05 kg
220 - 240 V ~
50/60 Hz
10,8 - 18 V=
approx. 0,06 A
approx. 25/35 min.
approx. 55/70 min.
GB
TCL 3
max. 3 A
13