Installing The Stove - Dometic ORIGO Serie Instrucciones De Uso

Mounting the stove
7.2

Installing the stove

A
NOTICE! Danger of damaging the device!
Before drilling any holes, make sure that no electrical cables or other
parts of the vehicle can be damaged by drilling, sawing and filing.
➤ Cut a rectangular hole into the countertop (dimensions see following table):
Model
2000
4100
➤ Open the top and remove the canisters.
➤ Place the stove in the middle of the cutout.
➤ Mark the drill holes.
Use the drill holes at the rim of the stove as template.
➤ Pre-drill the holes into the countertop where marked.
➤ Fasten the stove by screwing flat head screws through each drill hole at the rim.
➤ Place a class B-1 fire extinguisher in reaching distance.
12
Dimensions in mm
345 x 320
575 x 320
Origo
EN