Circular Saw; English - Berner BCS-86 Instrucciones De Manejo

CIRCULAR SAW

Congratulations!
You have chosen a BERNER tool. Years of experience,
thorough product development and innovation make
BERNER one of the most reliable partners for professional
power tool users.
Technical data
Art. No
Voltage
(U.K. & Ireland only)
Power input
No-load speed
Depth of cut
Blade diameter
Blade body thickness
Blade bore
Bevel angle adjustment
Weight
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance
of the instructions in this manual.
Denotes risk of electric shock.
EC-Declaration of conformity
BCS-86
BERNER declares that these power tools have been
designed in compliance with: 98/37/EEC, 89/336/EEC,
73/23/EEC, 86/188/EEC, EN 60745, EN 55014-2,
EN 55014, EN 61000-3-2 & EN 61000-3-11.
For more information, please contact BERNER at the
address below, or refer to the back of the manual.
L (sound pressure)
pA
L (acoustic power)
WA
Weighted RMS acceleration value
K (sound pressure uncertainty)
pA
K (acoustic power uncertainty)
WA
BCS-86
039981
V 230
V 230/115
W 1,750
-1
min 4,900
mm 86
mm 235
mm 1.6
mm 30
0 –45°
kg 8.4
10 Amperes, mains
13 Amperes, in plugs
94 dB(A)
105 dB(A)
< 2.5 m/s 2
2.8 dB(A)
2.8 dB(A)
15
Jörn Werner
Chief Executive
Offi cer (CEO)
BERNER GmbH, D-74653 Künzelsau
Package contents
The package contains:
1 Circular saw
1 Parallel fence
1 Saw blade wrench
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand this
manual prior to operation.
Description (fi g. A)
Your BCS-86 circular saw has been designed for
professional sawing of wood and plastic. Abrasive cutting
wheels are available for cutting metal and stone.
1 On/off switch
2 Lock-off button
3 Front handle
4 Spindle lock
5 Dust extraction outlet
6 Saw shoe
7 Riving knife
8 Lower guard retracting lever
9 Lower guard
10 Saw blade
11 Bevel adjustment knob
12 Mark for bevel cut
13 Mark for straight cut
14 Depth adjustment knob
15 Parallel fence
Electrical safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the
voltage on the rating plate.
Your BERNER tool is double insulated in
accordance with EN 60745; therefore no earth
wire is required.
E N G L I S H
BCS-86
Ulrich Lindner
Chief Operations
Offi cer BERNER (COO)