GYS GYSPOT ACCU Manual Del Usuario página 8

Wear protective (fire-proof) clothing (cotton, overalls or jeans).
Wear protective gloves and a fire-proof apron.
Ensure other people keep a safe distance from the work area and do not look directly at the
welding arc.
Protect others by installing fire-proof protection walls.
Remove all flammable products from the work area. Do not work in presence of flammable gases.
Do not inhale welding gases and fumes. Use the device in a well ventilated environment, with
artificial extraction if welding indoors.
Any welding operation undertaken in:
- rooms where there is an increased risk of electric shocks,
- poorly ventilated rooms,
- the presence of flammable or explosive material,
Should always be approved by a "responsible expert", and made in presence of people trained to
intervene in case of emergency.
Technical protection as described in the Technical Specification CEI/IEC 62081 must be
implemented. Welding in raised positions is forbidden, except in case of safety platforms use.
GYS cannot be held responsible for damage to persons or items, as a result of using the machine in the following
circumstances:
• Modification or neutralisation of safety elements has been undertaken
• Safety recommendations written in this manual have not been adhered to
• Modification of the product's specifications
• Use of accessories not specified by the manufacturer
• Failure to observe regulations specific to the country or state in which the machine is used.
GYS Company attests under its own responsibility that the product GYSPOT ACCU has been manufactured according to
the requirements of the following European directives:
Low voltage directive: 2006/95/CE – 12/12/2006
-
CEM directive : 2004/108/CE – 15/12/2004
-
They are in conformity with the harmonized standards:
EN 62135-1
-
EN 62135-2
-
134 BD des Loges
53941 Saint Berthevin
th
EC marking date: July 6
Président Directeur Général/ CEO
2012