Salamander FPS Serie Instrucciones página 8

Two people are needed to install the display on the stand. Insert the
four Keyhole Shoulder Washers through the four Keyhole slots and
then use four "C" Button Head Screws to permanently attach the Display
Beam and Display unit to the stand. Replace Upper & Lower Rear Cover.
Two people are needed to install the display on the stand. Insert the four Keyhole Shoulder Washers through the four Keyhole slots and
then use four 5/6 - 18 x 1/2 Button Head Screws to permanently attach the Display Beam and Display unit to the stand. Replace Upper Rear Cover.
Salamander Mobile Interactive Display Stands 501-692 [10.17] page 8 of 21