Sky RAPTOR C6 Instrucciones De Uso página 14

• Do not bring the retractable fall arresters into contact with
aggressive substances (e.g. oil, grease, acid, solvents or other
chemicals).
8.) Regular checks
The inspections (documented visual and functional checks) must
take place at least once a year (in accordance with EN) and should
be carried out by a qualified person in accordance with DGUV
guideline 312-906 (i.e. complying with national guidelines for PPE
inspection). These are intended to ensure the safety of the user, the
device's function and therefore also its service life. Maintenance
(documented disassembly and intensive inspection) must be
carried out at least once every 5 years and may only be carried out
by SKYLOTEC or a service company trained by Skylotec. Regular
inspection and maintenance depends on the actual usage intervals
and the atmosphere (dust, moisture etc.) in which the retractable
fall arrester is used. The device must be protected against contact
with third-party materials such as salts, oils, chemicals, paints and
against the impact of fire, welding flames and sparks, acids and
alkalis, and similar. The check must be entered in the Skylotec
Homebase, and the record card set out under Point 10 can also
be used.
9.) Identification and warranty certificate
The information on the applied stickers corresponds to that for
the supplied product. The pre-printed table reflects the state of
certification/standardisation as at the instructions' issue date.
The information noted on the product is binding.
a) Product name
b) Product number
c) Size / length
d) Material
e) Serial no.
f) Month and year of manufacture
g 1-x) Standards (international)
h 1-x) Certification number
i 1-x) Certification centre
j 1-x) Certification date
k 1-x) Max. number of people
l 1-x) Test weight / Test load
m 1-x) Max. load
n) Monitoring of production processes; quality management system
o) Source of declaration of conformity
You can get the full declaration of conformity by clicking
on this link: www.skylotec.com/downloads
10.) Control card
10.1–10.5) To be completed for audit
10.1) Date
10.2) Tester
14 14