Drying Cycle - Amplicomms DB 130 Instrucciones De Uso

1 At a glance
1 Drying compartment
2 Power button (for starting/stopping the drying cycle)
3 Power adaptor jack (please use only the original ac adapter).
Do not look directly at the two UV lights located in the
drying compartment.

2 Drying Cycle

1. Insert the USB-cable into the 5V power supply and the
Micro USB connector into the jack on the rear side of your
drying station. Then plug the power supply into a power
socket.
2. Press and hold the POWER button to wake up the unit and
start disinfection and drying process.
3. Open the lid of your unit.
4. Place the hearing instrument on the tray inside your drying
station (Note – instrument have to be clean from any
debris).
5. Close the lid.
NOTE: The full Disinfection and Drying circle is 4 hours.
6. After completion of the process open the lid.
7. Remove the dried and hygienically cleaned instrument.
1
2
3
5