Original Operating Manual; Technical Data; Machine Features; Intended Use - Festool ROTEX RO 90 DX FEQ Manual De Instrucciones

Original operating manual

1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear protective goggles.
Wear ear protection.
Wear a dust mask.
Disconnect from the power supply!
2

Technical data

Gear-driven eccentric sander
Power
Speed
Eccentric motion
Rotex rotary motion
Sanding stroke
FastFix sanding pad
Weight (without mains cable,
with sanding pad)
Safety class
3

Machine features

[1-1] Protector
[1-2] Change-over switch/spindle stop
[1-3] On/Off switch
[1-4] Mains power cable
[1-5] Extractor connector
[1-6] Speed control
[1-7] Sanding pad
[1-8] Stop rod
[1-9] Polishing pad*
[1-10] Delta sanding pad
[1-11] Slat sanding pad*
[1-12] Interface pad*
* not on all versions included in the scope of deliv-
ery
The specified illustrations appear at the beginning
of the Operating Instructions.
4
As specified, the machines is designed for sanding
and polishing plastic, metal, wood, composite ma-
terials, paint/clear coats, filler and similar materi-
als. Materials containing asbestos must not be pro-
cessed.
To guarantee electrical safety, the machine must
not be damp or operated in a damp environment.
The machine must only be used for dry sanding.
5
5.1
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
RO90 DX FEQ
erence.
The term "power tool" in the warnings refers to
400 W
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
3000 - 7000 rpm
5.2
220 - 520 rpm
– Harmful/toxic dusts can be produced during
3,0 mm
dia. 90 mm
1,45 kg
/II
– Prevent liquid polish from entering the ma-
– Only for AS/NZS: The tool shall always be sup-
– If the power tool is dropped or falls, check for

Intended use

The user is liable for improper or non-in-
tended use.
Safety instructions

General safety instructions

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
Machine-related safety instructions
your work (e.g. lead-containing paint, some
types of wood and metal). Contact with these
dusts, especially inhaling them, can represent a
hazard for operating personnel or persons in the
vicinity. Comply with the safety regulations that
apply in your country. Connect the electric power
tool to a suitable extraction system.
To protect your health, wear a P2 protective
mask.
Always wear protective goggles to protect
against sanding hazards.
chine. The penetration of liquid polish into the
electric power tool increases the risk of an elec-
tric shock.
plied via residual current device with a rated re-
sidual current of 30 mA or less.
damage to the machine and sanding pad. Re-
move the sanding pad for closer inspection. Re-
pair damaged parts before using again. Broken
sanding pads and damaged machines can cause
injuries and machine instability.
RO 90 DX FEQ
GB
11