Publicidad
Please read first!
3
The universal working table WT 840 is suita-
ble as a working table and as a machine
workstand.
- Its maximum load capacity is 80 kg.
- Machines are positively bolted to the perfo-
rated plate.
- An opening for connecting a dust collector
is provided at the centre of the table top.
- Below the table top there is an extra tool
tray.
- Two rollers make for easy relocation.
- After use the universal working table folds
up and stores space-saving.
Standard delivery
1
1
Stand with
- table top
- rollers
2
Perforated plate
3
Tool tray
Assembly
1. Unfold stand. The upper, round cross strut is
hooked into the two hooks on the underside of
the table top.
2
ZA0011E2.fm
2
3
2Great Britain
2. Fasten wing nut at support (grey arrow).
3. Fit tool tray between the two lower cross struts.
- To fasten machines, screw perforated plate to
underside of machine (screws not supplied),
then put perforated plate into table top.
- If a dust collector is to be hooked up, connect
suction hose to the Ø 100 mm suction port on
the underside of the table top.
Disassembly
1. Clear working table.
2. Remove tool tray from lower cross struts.
3. Loosen wing nut at the support.
4. Fold up stand.
5. Fasten wing nut at support, so that the support
can not unfold during tranport.
Technical specifications
Dimensions,
assembled
(height x width x depth)
Dimensions,
folded up
(height x width x depth)
Table top area
Weight
840 x 630 x 550 mm
950 x 630 x 90 mm
550 x 450 mm
19 kg
WT 840
Publicidad
