4.
Attach the bottom shelf (7) to the legs with 4 dowels (C).
5.
Attach the wheel covers (5) and wheels (5) to the front feet using two dowels (4) and the two
washers (D) and nuts (E).
6.
Turn the trolley over and secure the hooks (8) by inserting them into the side support.
7.
The trolley is ready to be used.
12
V.1.0
assembling the serving trolley
use
This trolley is designed as an additional piece of outdoor furniture for domestic use only, for storage or
as a support for barbecues or tabletop griddles.
The bottom panel of the outdoor trolley can support up to 15 kg. If this load is exceeded, it may deform
and become weakened.
maintenance
To keep your trolley as long as possible, we advise you to:
• Not use sharp objects or abrasive cleaners for cleaning.
• Clean after each use with warm soapy water and a soft, non-abrasive cloth. Rinse and dry.
The trolley should not be used as a cutting board.
Cover with a tarpaulin during the summer months and then shelter in a cool, dry place.
after-sales service
For any spare parts requests, please contact your retailer.
warranty
All our trollies are under warranty for 2 years from the date of purchase (with supporting invoice or
receipt), excluding the cost of returning the product, which remains the responsibility of the consumer,
subject to compliance with all the instructions in this manual, subject to the availability of parts in stock
and subject to presentation of the product in its original packaging.
This warranty is not valid in the following cases:
• Abnormal conditions of use
• Incorrect storage
• Failure to maintain
• Product modification
• Professional use
13
V.1.0
use