Festool Kapex KS 120 Instrucciones De Servicio página 15

English operating manual
Circular cross-cut saw
KAPEX KS 120 E
Table of contents
1 Symbols
2 Technical data
3 Machine features
4 Intended use
5 Safety instructions
6 Commissioning
7 Adjustments
8 Operation
9 Service and maintenance
10 Accessories
11 Disposal
12 Warranty
13 EU Declaration of Conformity
1 Symbols
Warning of general danger.
Read the Operating Instructions/Notes!
Danger area! Keep hands, fi ngers and arms away
from this area.
Wear protective goggles.
Wear ear protection.
Wear a dust mask.
Wear protective gloves.
Caution: laser beams!
Dispose of the machine, accessories and pa-
ckaging at an environmentally responsible recy-
cling centre.
2 Technical data
Power
Rotational speed (idle)
Tool spindle, dia.
Weight
Protection class
See section 8 "Operation" for the maximum workpiece
dimensions.
The specifi ed illustrations are at the beginning of this ope-
rating manual.
3
(1.1)
(1.2)
(1.3)
(1.4)
(1.5)
(1.6)
(1.7)
(1.8)
(1.9)
(1.10)
(1.11)
(2.1)
(2.2)
(2.3)
(2.4)
(2.5)
(2.6)
(2.7)
(2.8)
(2.9)
4
The electric power tool is a stationary unit designed for
sawing blocks of wood, plastic, aluminium profi les and
similar materials.
Do not process other materials, in particular steel, concrete
and mineral materials.
The electric power tool is designed and approved for use
by trained persons or specialists only.
In spite of compliance with all relevant design regulations,
dangers may still present themselves when the machine
is operated, e.g.:
• Workpiece parts being thrown off
• Parts of damaged tools being thrown off
• Noise emission
• Dust emission
5
5.1
• Before using the machine, carefully read all of the at-
tached safety instructions and the Operating Instructions.
Keep all of the accompanying documents and pass on
the documentation if the machine changes ownership.
• Never allow children to use the machine.
• Before using the machine, make yourself suffi ciently fa-
miliar with the application, setting and operation of the
machine.
5.2
Safety precautions
• Always use original Festool tools (in accordance with EN
847-1).
1500 W
• Use only correctly sharpened tools without damage or
1400 - 3400 rpm
deformation. The maximum rotational speed specifi ed
30 mm
on the tool must be observed.
21.5 kg
• Select the saw blade suitable for the material you wish
/ II
to work on.
• Do not use saw blades made of high-speed steel.
• Do not use spacers or spindle rings.
• Ensure the work area has adequate lighting.
• Attach the machine securely to the worktop or a
bench.
15
Machine features
Hand grip
On/off switch
Switch-on lock
Lever for cutting depth limiter
Rotary knob for clamping the guide fi xture
Transport safety device
Scale for mitre cuts (vertical)
Scale for mitre cuts (horizontal)
Clamp lever for mitre cuts (horizontal)
Stop lever for preset mitre cut angles (horizon-
tal)
Rotary handle for fi ne adjustment of mitring angle
(vertical)
On/off switch for laser
Adjusting wheel for rotational speed
Fastfi x spindle lock
Clamping lever for stop ruler
Release lever for special cutting position
Lever for special cutting position
Cable holder with integral handle
Clamp lever for mitre cuts (vertical)
Selector switch for mitre angle range (vertical)
Intended use
The user bears the responsibility for damage and
accidents caused by improper use.Other risks
Safety instructions
General safety instructions
Machine-related safety instructions