Technical Features - Amate Audio HD Serie Manual De Instrucciones

Other causes that could prevent the normal work of the amplifier can
also activate the PROTECTION. Under those circumstances, the installa-
tion has to be revised according to the basic principles described below:
- Disconnect all the connected peripheral equipments (sources,
pre-amplifiers, and loudspeakers). Leave the amplifier "alone" and verify
if the anomaly disappears or if it remains in only one channel or both.
- Temperature: Cooling (possible air obstruction. Check if the fans
are working and make an internal cleaning).

15. Technical features

Voltage Gain
Input Sensitivity
Input Impedance
Slew Rate
Output Power (1 kHz - 0,1% THD)
Stereo 8 Ω
Stereo 4 Ω
Stereo 2 Ω
1
Bridge 8 Ω
Bridge 4 Ω 1
Average Current draw
4
Frequency Response
Damping Factor (1 kHz @ 8 Ω)
Crosstalk
S/N Ratio (A-weighted)
Mains
Dimensions (HxWxD)
Weight
Note (1): Continuous burst tone 20 ms (0 dB) / 480 ms (-20 dB) in accordance with EIA RS-490 and IEC 60268-3(IHF A-202).
Note (2): Driving the amplifier at 2 Ω channel / 4 Ω bridge at full power mode in poor ventilation conditions may cause a thermal overload protection.
2 Ω power is time limited by mains circuit breaker.
Note (3): Specifically designed for long term operation in bridge 4 Ω at full power.
Note (4): Heavy duty musical program.
Specifications subjected to change without prior notice (April 2016).
If you follow the instruction manual and recommendations, we are sure that this amplifier will always perform within the predetermined parame-
ters, ensuring its long life and total efficiency.
Certificate of warranty (enclosed document)
The Conditions and Observations for the application of this Contract of Warranty are for all the territories
of Spanish.
For other countries, the specifications of each country must be complied with, as only the Representative
or National importer themselves can be held responsible for warranty terms.
For any claim of a Legal type, only the Ordinary Courts corresponding to the city of Terrassa (Barcelona-
Spain) will be valid.
Please follow the instructions on the last page of this manual. Please READ the instructions and conditions
gathered in the Warranty Certificate to fully take advantage of the After-Sales Service.
8
HD800
1 V
1
230 + 230 W 350 + 350 W
400 + 400 W 600 + 600 W
550 + 550 W² 850 + 850 W²
800 W
1100 W²
3 A @ 230 V AC 4 A @ 230 V AC
280
60 dB
102 dB (A) 104 dB (A)
88 x 482 x 420 mm 88 x 482 x 420 mm 88 x 482 x 440 mm 88 x 482 x 440 mm 88 x 482 x 440 mm
14 kg
- Short circuit: Check the state of the loudspeaker line (possible
short circuit, disconnect and check if the anomaly disappears).
- C.C. at the output (DC): Possible serious breakdown. Contact an
authorized technical service.
In all cases it is recommended to go through all previous checkpoints
before contacting the authorized technical service and reporting the
observed problem.
HD1200 HD2000
32 dB
1.25 V 1.74 V
20 kΩ
+/-12 V/μs
600 + 600 W
1000 + 1000 W
1500 + 1500 W²
1200 W 2000 W
1700 W² 3000 W²
5 A @ 230 V AC
20 Hz - 20 kHz (0/-1 dB)
300 350
105 dB (A)
220 – 240 V AC- 50/60 Hz
15 kg 18 kg
HD3200 HD4000
2 V 1.88 V
1000 + 1000 W 650 + 650 W
1750 + 1750 W 1200 + 1200 W
2500 + 2500 W² 2100 + 2100 W³
3500 W 2840 W
5000 W² 4200 W³
6 A @ 230 V AC 7 A @ 230 V AC
400 350
65 dB
108 dB (A) 108 dB (A)
21 kg 21 kg
User's Manual / Manual de usuario