Application - Medisana EPD Instrucciones De Manejo

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 63
3.3
Preparing
the skin
3.4
Placing the
electrodes
Before the first treatment, we recommend you clean the skin with an alco-
hol-free cleanser to remove any remains of grease, make-up etc. Dry the skin
thoroughly.
Treatment may only be applied to healthy skin. The treatment may be per-
formed on epilated and non-epilated skin. Hair need not be visible for the
electrolysis epilation to be performed (the growth phase begins when the hair is
still 4 mm underneath the skin).
Before placing the self-adhesive electrode pads
device is turned off.
Remove the protective film before attaching the self-adhesive electrode pads.
Keep the protective film carefully so that you can stick the electrode pads back
onto it after use.
Stick the electrode pads according to the illustration (see chapter 3.5) to the
part of your body where treatment is to be given. Position the electrode pads
on the areas of skin where you want to remove the hairs. Press the self-ad-
hesive electrode pads firmly onto the clean and dry skin. If the electrode pads
are not attached correctly, no current flow can be established, and the device
would switch itself off automatically a few seconds after a program is started
(see chapter 3.8).
WARNING
• Before you remove the electrode pads or place them elsewhere
on your body, always make sure that the device is turned off or
turn it off using the ON/OFF switch
• Only then remove the self-adhesive electrode pads carefully by
pushing your finger under the edge of the electrode pad and
lifting the electrode pad gently thereby. Never remove the
self-adhesive electrode pads by pulling the cables.
CAUTION
• For safe and hygienic storage stick the electrode pads back
onto the protective film.
• If the electrode pads
original MEDISANA electrodes pads.
Once you have attached the adhesive electrode pads on the area of skin to be
epilated, you should proceed as described from chapter 3.6. The size of the
electrode pad depends on the surface that is to be treated. Special electrode
pads are supplied for the area above the lips. If the body area to be treated
allows, we recommend that you use the large electrode pad where possible
(50 x 90 mm) (exception: face).

3 Application

, please ensure that the
!
have to be replaced, please use only
GB
21

Publicidad

Tabla de contenido
loading

Productos relacionados para Medisana EPD

Este manual también es adecuado para:

85500

Tabla de contenido