Original operating manual
1
Safety instructions
WARNING! Read all safety warnings, instructions, illustrations and specifica-
tions provided with this tool. Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
– This appliance must not be used by persons (including children) with reduced phys-
ical, sensory or mental capabilities, or lack of experience and knowledge. Children
need to be supervised to ensure they do not play with the appliance.
– WARNING! Machine may contain hazardous dust. Only authorised qualified special-
ists with suitable protective equipment may perform maintenance, empty the con-
tainer and change the filter.
– Always operate with the filter system installed!
– Always use suitable protective equipment!
– If intact following a visual inspection, work in a dry environment according to in-
structions!
When extracting large quantities of oak or beech wood dust or dust that exceeds
the permitted limit values, only extract from a single machine (electric or air
tool).
– Risk of explosion and fire:Do not absorb:
– Sparks or hot dust;
– Combustible or explosive materials (e.g. magnesium, aluminium, petrol, diluting agents – with
the exception of wood);
– Aggressive materials (e.g. acid, alkaline solutions, solvents);
– Chemically reactive materials, which lead to the generation of heat, acids/bases, gases, etc.
(e.g. reactive 2-component materials, aluminium and water).
– Observe all national safety regulations as well as the material manufacturer's spec-
ifications!
– Always use the socket on the machine for the purpose specified!
– Check the plug and the cable regularly and should either become damaged, in order
to avoid a hazard, have them replaced by an authorised after-sales service work-
shop.
– Do not lift or transport using a crane hook or lifting gear!
CTM
GB
13