Technical Description; Using The Heater - Dometic ORIGO 5100 Instrucciones De Uso

Technical description

6 Technical description
The heater is made of aluminium and stainless steel and uses the absorption
principle. The canister has a capacity of 1.2 l. Denatured or soot free alcohol
is used as fuel.
Alcohol is absorbed into a non-flammable material in the canister.
7

Using the heater

WARNING!
!
The top cover (fig. 1 1, page 2) and the outer container (fig. 1 9,
page 2) heat up when in use. Touching them can cause severe
burns.
7.1 Filling-in denatured alcohol (fig. 1, page 2)
WARNING!
!
Never pour fuel through the burner openings.
Do not fill near an open fire or glow.
Overfilling, spilt alcohol and hot objects can cause severe burns.
➤ Ensure the heater is cooled down to room temperature.
➤ Take off the top cover (1).
➤ Release the burner (4) from outer container (9) by pressing lock
spring (10)
➤ Lift the grid (3).
✓ Canister (8), burner (4) and grid (3) are lifted as one unit from the outer
container (9).
➤ Release the canister (8) from the burner (4) by pressing the spring (6).
➤ Check canister opening ensuring there's neither fire nor glow.
➤ Hold the canister (8) tilted down (fig. 2, page 2).
➤ Fill the denatured alcohol through the wire mesh into the opening of the
canister (8).
The maximum capacity per canister must not exceed 1.2 l.
➤ Check the fuel level by tilting the canister (8) vertically (fig. 3, page 3).
8
Dometic ORIGO
EN