Publicidad
Idiomas disponibles
Idiomas disponibles
Hints for Optimum Use
General
- Use a high speed for wood, a medium speed for aluminum and PVC and a low speed
for metals other than aluminum.
Sawing laminates
As the saw blade cuts on the upward stroke, splintering may occur on the surface closest
to the shoe plate.
- Use a fine-tooth saw blade.
- Saw from the back surface of the workpiece.
- To minimize splintering, clamp a piece of scrap wood or hardboard to both sides of
the workpiece and saw through this sandwich.
Sawing metal
- Be aware that sawing metal takes much more time than sawing wood.
- Use a saw blade suitable for sawing metal.
- When cutting thin metal, clamp a piece of scrap wood to the back surface of the
workpiece and cut through this sandwich.
WARNING: Fire Hazard. Do not use vacuum adapter when cutting metal. Metal
- Spread a film of oil along the intended line of cut.
filings will be hot and could cause a fire in the vacuum container.
Maintenance
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment should be performed by authorized service centers or other qualified service
personnel, always using identical replacement parts.
Accessories
Recommended accessories for use with your tool are available from your local dealer or
authorized service center.
WARNING: The use of any accessory not recommended for use with this tool could be
hazardous.
Service
Black & Decker offers a full network of company-owned and authorized service
locations. All Black & Decker Service Centers are staffed with trained personnel to
provide customers with efficient and reliable power tool service.
Whether you need technical advice, repair, or genuine factory replacement parts,
contact the Black & Decker location nearest you.
Solamente para propósito de Argentina:
Black & Decker Argentina S.A.
Colectora Este de Ruta Panamericana
Km. 32.0 El Talar de Pacheco
Buenos Aires (B1618FBQ)
No. de Importador: 1146/66
Solamente para propósito de México:
Importado por: Black & Decker S.A. de C.V.
Bosques de Cidros, Acceso Radiatas No. 42
3a. Sección de Bosques de las Lomas
Delegación Cuajimalpa,
Solamente para propósitos de CCA
Importado por: Black & Decker LLC
Calle Miguel Brostella Final
Edificio Milano I, Mezanine 5,6 y 7
Solamente para propósito de Chile:
Importado por: Black & Decker de Chile, S.A.
Av. Pdte. Eduardo Frei M. 6001-67 Conchalí
Solamente para propósitos de Colombia
Importado por: Black & Decker de Colombia, S.A.
Carrera 85D # 51-65, Bodega 23
Complejo Logístico San Cayetano
Black & Decker del Perú S.A.
Av. Enrique Meiggs 227.
Teléfono: (511) 614-4242
Pacheco Trade Center
Partido de Tigre
República de Argentina
05120, México D.F.
Tel. (52) 555-326-7100
El Dorado, Panama
Tel. 507-360.5700
Santiago de Chile
Tel. (56-2) 687 1700
Bogota - Colombia
Tel. 744-7100
Pque. Industrial - Callao
RUC 20266596805
Impreso en China
Impresson na China
Printed in China
587384-03
10/29/07
Publicidad
