Auxiliary Handle; Depth Stop; Working With The Machine; Acoustic Warning Signal - Festool BHC 18 Li-Basic Manual De Instrucciones

Ocultar thumbs Ver también para BHC 18 Li-Basic:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
9.3

Auxiliary handle

We recommend woking with an auxiliary
handle [5-1] to ensure a safe, non-tiring
working posture.
Attaching the auxiliary handle [5]
► Attach the auxiliary handle [5-1] to the neck
of the gear housing.
► Turn the grip anticlockwise until the auxili­
ary handle [5-1] is secured in position.
5
5-2
5-1
1
2
9.4

Depth stop

The drilling depth can be adjusted us­
ing the depth stop [5-2].
Attaching the depth stop [5-2]
► Unscrew the auxiliary handle [5-1] by turn­
ing the grip anticlockwise.
► Insert the depth stop [5-2] in the auxiliary
handle [5-1].
► Pull out the depth stop [5-2] until the dis­
tance between the tip of the drill and the tip
of the depth stop corresponds to the desired
drilling depth.
► Tighten the grip on the auxiliary han­
dle [5-1] again.
9.5
Extraction
Please observe the safety regulations applica­
ble in your country for dust. The relevant limit
values must be observed at the workstation. A
dust extractor may be required for correspond­
ing dust exposure and depending on regula­
tions. Festool offers a drilling dust nozzle in the
accessories system.
Use drill dust collection nozzle [6]
The drill dust collection nozzle has a patented
dual-chamber system for clean drilling and a
secure hold on floors, walls and ceilings.
12
If the extractor has an automatic filter
cleaning system this must be deacti­
vated.
► Put it on the wall, floor or ceiling.
► Connect the dust extractor and switch it on.
The drill dust collection nozzle clings to the
surface.
► Place rotary hammer.
6 6
1
3

10 Working with the machine

10.1 On/Off switch [1-4]
Press = ON, release = OFF
The speed of the machine depends on
how far the on/off switch is pressed
in.
10.2 Belt clip [1-6]
The belt clip (right/left) allows the user to at­
tach the machine briefly to work clothing.

10.3 Acoustic warning signal

Acoustic warning signals sound and the power
tool switches off in the following operating
states:
2

Publicidad

Tabla de contenido
loading

Tabla de contenido