WMF 3200000129 Instrucciones De Uso página 15

the required programme (B-F) is displayed. If the programme selection (A)
does not change after 3 seconds, the programme display remains lit, the On/
Off button (A) is activated and the programme starts.
▪ If an incorrect programme was inadvertently selected, press the On/Off
button (A) several times in order to switch off the appliance, until none of
the programme symbols (B-F) are lit on the display. The appliance then enters
standby mode. Start the required programme by pressing the On/Off button
(A) again, until the required symbol is displayed.
▪ Once the programme time has lapsed, the appliance emits an audible signal,
the keep-warm symbol is illuminated on the display and the appliance
automatically enters warm-up mode.
▪ Unplug the mains plug each time after use and allow the appliance to cool
down.
▪ The warm-up period depends on the selected programme, the size and the
material of the bottle/jar as well as the consistency of the contents. For
further information see the following programme descriptions in these
instructions for use.
Programme: Keep-warm / defrost solid or liquid baby food (B)
▪ Select this programme to keep warm contents that have already been heated
up to body temperature. You can also use this programme to gently defrost
baby food. Note that this programme is not suitable for heating up baby food.
▪ Fill the bottle warmer with drinking water to the fill level for baby milk,
although no higher than the "MAX" mark in the appliance.
▪ Press the On/Off button (A) until the required programme symbol is displayed.
After around three seconds without pressing the On/Off button (A) again, the
program starts automatically.
▪ The maximum operating time for both programmes together is around 60
minutes.
▪ If you feel that the contents are not warm enough, you can place the bottle/
jar back in the appliance to continue heating it.
▪ Risk of scalding, always check the temperature of the food before you feed it
to your baby! The underside of your wrist is ideal as this area is temperature-
sensitive
Programme: Warm up to 100 ml of baby milk (C)
▪ Select this programme to gentle warm up small amountes of baby milk to
body temperature.
▪ Fill the bottle warmer with drinking water to the fill level for baby milk,
although no higher than the "MAX" mark in the appliance.
▪ Press the On/Off button (A) until the required programme symbol is displayed.
After around three seconds without pressing the On/Off button (A) again, the
program starts automatically.
▪ Once it has reached body temperature, an audible signal is emitted and the
appliance goes into keep-warm mode. The maximum operating time for both
programmes together is around 60 minutes.
▪ If you feel that the contents are not warm enough, you can place the bottle/
jar back in the appliance to continue heating it.
Note: The warm-up period depends on the amount of the contents and the
starting temperature (i.e. refrigerator temperature or room temperature).Note:
15