Display Backlight; Selecting The Start Altitude - VDO MC 2.0 WR Manual Del Usuario

DE ENG FR IT ES

3.5 Display backlight

The MC 2.0 has a display backlight.
The display backlight is activated by pressing the buttons
If the display backlight is activated, the LIGHT icon appears on the
display.
3.6 Selecting the start altitude / recalibrating the actual altitude
The MC 2.0 can work with two different start altitudes
(example: home altitude and altitude at holiday location).
The current altitude can be set by entering the number of
METERS/FEET or the AIR PRESSURE. Please also read section 6.10.
Press and hold the ALTI button
B
ALTITUDE SELECT? flashes on the display.
B
ALTITUDE
B
ACTUAL ALTI
B
HOME 1
B
HOME 2
B
is displayed (depending on the previously accessed configuration).
A selection is made by pressing ALTI
B
The selection is confirmed by pressing
B
For the start altitudes, the query 300 appears (numerical example).
B
HOME ALTI 1 (or 2) SELECT OK ?
B
The selection is confirmed by pressing MENU.
B
The MC 2.0 confirms by displaying ALTITUDE DONE.
B
44 MC 2.0 WR
NL PL
A for three seconds.
A or P .
M .
VDO CYCLECOMPUTING
If the display backlight is activated and a button is pressed,
+ . the backlight illuminates for a few seconds.
C
ATTeNTION: press the buttons BIKe + CLeAR again to switch off the
display backlight during the day. This SAVeS BATTeRY POWeR.
ACTUAL ALTITUDE can be used to re-calibrate the current altitude.
This can be done by entering the (known) altitude in METERS/FEET
or the AIR PRESSURE. The sea level pressure can be found online on
weather forecast websites.
Press M to confirm the ALTITUDE--ACTUAL ALTI
setting.
ACTUAL ALTI--ALTITUDE or
ACTUAL ALTI--AIR PRESSURE
is displayed.