Setting The Odometer - VDO MC 2.0 WR Manual Del Usuario

DE ENG FR IT ES
6.5 Setting the total distance
This area enables you to set the total distance cycled. The information
is separately provided for bike 1 and bike 2. At the start of the season,
you can reset the total distance cycled to zero, for example.
ATTENTION: the total distance is SAVED when the battery is
changed. The data is not lost.
Process:
Press and hold M for three seconds. SETTINGS--OPEN? flashes.
LANGUAGE---SELECT---appears on the display.
Press P to scroll to ODOMETER---SET---.
Press M in confirmation.
ODOMETER ODO BIKE 1 or ODO BIKE 2 is shown on
the display.
Press ALTI A
Press M in confirmation.
54 MC 2.0 WR
NL PL
or P to make a selection.
VDO CYCLECOMPUTING
ODO BIKE 1 (or 2)--SET KM or SET MILE is shown on
the display.
The first digit flashes.
Press ALTI A
it. Once you have set the correct value, press
confirm your setting.
The second digit now flashes.
Press ALTI A
it. Once you have set the correct value, press
confirm your setting.
Continue the setting process until all digits have
been set.
ODO BIKE 1 (or BIKE 2)--SET OK? Press
or to make a correction.
C
The MC 2.0 confirms by displaying ODO BIKE 1
(or BIKE 2) SET DONE.
To exit settings mode, press and hold the
SETTINGS--CLOSE? flashes. The MC 2.0 switches back to function mode.
to reduce the value or P to increase
to reduce the value or P to increase
M to confirm
C button for three seconds.
to
M
M to