Pressalit Care R3016–RF016 Instrucciones De Uso página 4

4
5
4
Before using the product for the fi rst time
• Clean the support arm after fi tting.
• Check that the arm moves smoothly if fi tted on a horizontal
and/or vertical track.
Operation
• Lower the arm from its vertical to horizontal position.
Adjustment
• Adjusting the height of the vertical track: Press lock handle
inwards until it engages. Turn the handle downwards.
Adjust support arm and turn lock handle upwards to lock
in position.
4
• Adjusting the height of the horizontal track: Use an Allen
key to slacken the lock.
lock if necessary.
Cleaning
Daily:
• Use ordinary soapy water. Avoid use of abrasive, corrosive
or chlorine-based cleaning products. Rinse off with clean
water and dry with a soft cloth.
• This product cannot be cleaned in an autoclave.
Occasional:
• Removal of lime deposits on aluminium parts: Use 3 parts
30% household vinegar to 7 parts water. Wipe off with a
cloth dipped in clean water and wrung out.
Maintenance
• If a product mounted on a horizontal track does not move
smoothly, it may be necessary to clean and lubricate the
slide. Use a mild detergent, wipe off with a soft cloth and
allow to dry. Apply a lubricant in the form of silicon spray,
and wipe off with a dry cloth.
Adjust the arm and retighten the
5