Lenco SCD-550 Manual Del Usuario página 9

Ocultar thumbs Ver también para SCD-550:

Idiomas disponibles

Press the PLAY/PAUSE button to play according to the programmed track.

To clear program play press the STOP button twice or change to another mode.

During program play you can also do the "Repeat One" or "Repeat All" operation. But during program play, random

play is not supported.

7. BLUETOOTH

Please follow the pairing instructions below to link the unit to your Bluetooth device.

Slide the FUNCTION switch to the "CD/AUX/USB/BT" position.

Press & hold the PLAY/PAUSE button to change it to USB mode. Now press & hold the PLAY/PAUSE button again

to further change it to Bluetooth mode. The display will show "bt".

If the unit has never been paired with a Bluetooth device before or cannot find the last paired device, the flashing "bt"

on the LCD indicates it is in searching mode. Turn on the Bluetooth function of your Bluetooth device and enable the

search until "Lenco SCD-550" is found. Select "Lenco SCD-550" on the Bluetooth device to make connection. Enter

the pass code "0000" if required.

After successfully paired the unit's display will show "bt".

You can now start playing music from your Bluetooth device wirelessly to the speaker.

You can press the PLAY/PAUSE button on the unit to pause or resume the playback.

You can press the SKIP buttons on the unit to skip to the next song or go back to the previous song.

Notes:

If you want to pair the unit with another Bluetooth device, press & hold the PAIRING button for 3 seconds or turn off the

Bluetooth function of the device currently paired with the unit and then repeat the above step 3.

Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth enabled devices for Bluetooth

operation since it may vary from model to model.

If your Bluetooth enabled device does not support A2DP profile, it will not play music through the speaker, even if

paired.

If you are pairing your computer to the unit using Bluetooth, you may need to set the speaker as your computer's

default sound device.

Tabla de Contenido