Changing The Batteries; Technical Data - Seca 869 Manual De Instrucciones

7. Servicing
Your seca scale leaves the factory with an accuracy greater than ± 0,15 %. To ensure that
this accuracy is maintained, the product must be carefully set up and regularly maintained.
Depending on the frequency of use, we recommend servicing every 3 to 5 years. Please
ensure that a qualified service agent is used. If in doubt, contact seca Customer Service for
further information.

Changing the batteries

bAtt
When or
6 type AA 1.5 V batteries.
– Carefully turn over the scale so that the
base of the scale is accessible.
– Open the cover.
– Insert the new batteries in the battery
compartment.
Check that the polarity is correct!
– Close the cover.
– Then turn the scale back up the right
way.

8. Technical data

Dimensions scale
width:
height:
depth:
Dimensions weighing platform
width:
height:
depth:
Height of figures
Weight
Temperature range
Maximum load
Minimum load
Power supply
• Batteries
– Supply voltage
– Battery type
Modell 869
appear in the display, you should change the batteries. You need
313 mm
60-66 mm
315 mm
205 mm
55 – 75 mm
48 – 80 mm
20 mm
approx. 4,3 kg
+10 °C to +40 °C
250 kg / 550 lbs / 39 sts
2 kg / 4.4 lbs
9 V
6 x type AA, 1.5 V
GB
23