Putting Into Service; Operation Elements - HAEGER HB-80C-024A Instrucciones De Uso

Putting into Service

Electrical Connection
1. Connect the device to a duly installed 220-240V~50/60Hz protective contact
socket.
2. Before inserting the plug into the socket, make sure that the mains voltage
to be used matches that of the device. You can find this information on the
nameplate.
Operation
DANGER! Risk of electric shock!
Only insert the mains plug into a wall socket when the multi
chopper is fully assembled and filled.
DANGER! Risk of injury from cutting!
•
The blade insert is sharp. Handle it with care.
•
The device must never be operated without the vessel.
•
The blade insert continues to rotate after the device is switched off. Wait
for it to stop moving before you remove the working cover.

Operation elements

– Speed Controller: A
The blending speed is adjustable from 1 (minimum) to 6 (maximum speed).
– Start button
Keep the power button pressed to work at the set speed. Release it to
switch the device off.
– TURBO button: C
Keep TURBO button pressed for blending at maximum speed. The speed
controller setting is irrelevant here. Release the TURBO button to switch the
device off.
Assemble Attachments
1) Attach the motor unit to the attachment in such a way that the
attachment marking
2) Turn the motor unit such that the attachment marking
the .
Instructions for use
: B
LOCK is below the symbol
English
.
LOCK points to
3