Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
Remove the accessory part
To remove the accessory part, turn the motor unit such that the attachment
marking
LOCK points to the unlock marking
from the accessory.
Short-time operation
The appliance has been designed for short-term operation only, ie it should not
be operated continuously for more than:
60 sec.
Blender
10 sec.
Chopper
90 sec.
Mashing potato
90 sec.
Whisk
Switch off the appliance afterwards and allow the motor to cool down before
switching it on again.
Practical hints
•
You should never fill the bowl more than 2/3 full when blending or whipping
to avoid spillages.
•
The preparation must at least cover the lower part of the blender shaft for
the blending to be successful.
•
Remove bone and gristle from meat before putting it in the bowl.
•
When using the blender shaft to process hot preparations directly in the
cooking pan, remove the pan from the heat source first and leave to cool
slightly. When blending hot food in the mini-chopper bowl, leave them to
cool for a while before putting them in the bowl.
•
Do not blend food and liquids at a temperature higher than 80°C (175°F).
•
For fibrous foods (leeks, celery, asparagus, etc.) clean the blender shaft
regularly during use while following the safety instructions for disassembly
and cleaning.
•
For fruit-based preparations, first cut up the fruit and remove pips and
stones.
•
Do not use the appliance with hard food like coffee beans, ice cubes,
sugar, cereals, whole spices, grains and chocolate.
•
NOTE: adjust the rotation speed to suit the foodstuff to be blended. Select
normal speed for soft foodstuffs to be blended (1-6) and turbo speed for
harder foodstuffs (TURBO).
6
and pull off the motor unit
Instructions for use
Publicidad
Tabla de contenido
