Ferplast exploralight Manual De Uso página 9

Installation
• Remove the overtank lamp from the packaging and
connect the 2 brackets so that they run along the guides
in the lower part of the overtank lamp itself, then attach
the 4 suction pads.
• Fix the anti-reflection plate above the Ferplast EXPLORA
terrarium, having loosened the 2 frontal screws.
• Position the overtank lamp above the terrarium using the
special suction pads, so that the 2 frontal suction pads are
attached to the glass while the rear ones are positioned in
the area of the metal sheet at the back where slots have been
specially provided.
• If you are using a fluorescent UVA-UVB lamp, we recommend
that you position it at the back so that the light passes
directly into the terrarium through the rear slots (otherwise
the glass could filter out the benefits of the UV rays).
Antireflection screen
7
English