Attach Cleaning Pad; Assemble Power Adapter; Install Safety Tether - ECOVACS ROBOTICS WINBOT8 Manual De Instrucciones

3.2 Attach the Cleaning Pad
T u r n W I N B O T 8 o v e r a n d a t t a c h t h e
Cleaning Pad to the Velcro smoothly. Make
sure the Cleaning Pad is placed exactly
within its Velcro area and does not cover the
Fan or Edge Detection Sensors.
3.4 Install the Safety Tether
If WINBOT is used to clean an outside window, the Safety Pod and Tether
MUST be used.
*
If WINBOT 8 is being used to clean an inside window please skip to step 3.6.
A
C
End A: Robot Power Cord
End C: Safety Pod
3. Operating the Robot
3.3 Assemble the Power Adapter
D
End B: Power Adapter Power Cord
End D: Safety Tether
B
D
7
EN