Overview Of The Components / Delivery Scope; Unpacking The Device; Start-Up; Telescopic Suction Pipe - Profi Care PC-BS 3038 Manual De Instrucciones

Ocultar thumbs Ver también para PC-BS 3038:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 20
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
• Do not suck up liquids!
• Do not suck up hot ashes or pointed or sharp objects!
• Do not use the device in damp rooms!
• Never use without the filter. Check that the filter is inserted cor-
rectly!
• Hair, clothing and body parts away from the vacuum nozzle dur-
ing use!
• Keep the vacuum cleaner away from sources of heat like radia-
tors, ovens, etc.!
Overview of the Components /
Delivery Scope
1 Filtering unit unlock / lock button
2 Engine unit
3 On / off switch (O / I / II)
4 Cover for exhaust filter
5 Carrying handle
6 Power cord
7 Hook for wall holder
8 Dust collector base plate
9 Dust collector with HEPA filter
10 Button to open dust container
11 Lever for extending and retracting the brushes
12 Floor nozzle
13 Slide for telescopic suction pipe

14 Telescopic suction pipe

15 Connector for suction tube or nozzle attachments
16 Dust container cover
17 Brush nozzle
18 Crevice nozzle
19 Hard floor brush
20 Wall holder
Accessories not shown
2 × Dowel
2 × Screw
PC-BS3038_IM

Unpacking the Device

1. Remove the device from its packaging.
2. Check the delivery scope for completeness.
3. Check the device for any transport damage, in order to
prevent hazards.
NOTE:
In case of any transport damage, contact your dealer
immediately. Do not use a damaged device!

Start-Up

Telescopic suction pipe
1. With a light twist, place the telescopic suction tube on the
appliance connector.
2. Loosen the locking mechanism by
sliding and holding the button (13) in
the direction of the arrow marking.
3. Extract one tube from the other to the
desired length.
4. Release the button in order to lock the
connection.
• Assemble the floor nozzle and / or the accessories.
31
27.03.19

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido