Nikon Laser 550A S Manual De Instrucciones página 27

Operation and internal display
Jp
【5】 Height mode
En
Fr
Operation/Results
Es
5 Measurement with height mode
Pt
5-1 Seeking your target
Height (from horizontal)
(Align the reticle with target)
5-2 Measurement With the POWER button depressed,
(Laser irradiate symbol is displayed.) continuous measurement is possible for up to
20 seconds. (When done, 5-3 display appear)
5-3 Failure to measure
5-4 Height (from horizontal)
Measurement OK
Follow by 5-5 or 5-1.
Angle（from horizontal） 【6】
5-5 Data display after (1)
switching modes
(2)
Switching the measurement unit
(height between two points)【7】
changes it for each mode. The POWER
(3)
button can be used to measure in each
mode. See the relevant section.
(4) Horizontal distance【4】
(5) Height (from horizontal)
The angle and vertical separation
(height between two points) are
Return to 5-5-(1) and repeat.
displayed when set at FULL mode.
(In Limited mode, return to 5-5-(3),
Limited mode shows linear distance,
then repeat (3), (4) and (5).
horizontal distance and height.
Regardless of process, after 30 seconds
8
Power off
since your last operation, power turns off.
52
Work Button Display
POWER
Repeat step 5-1.
MODE
Vertical separation MODE
blinks
Linear distance【3】 MODE
MODE
MODE
MODE
30 seconds
without
operation
【6】 Angle mode
Display examples
Operation/Results
meter yards
Elevation (°) Depression (°)
6 Measurement with angle mode setting (only at FULL mode setting)
6-1 Seeking your target
(Align the reticle with target.)
6-2 Measurement
(Laser irradiate symbol is displayed.)
6-3 Failure to measure
45.0 49.2
6-4 Measurement OK
-13
13
6-5 Data display after
switching modes
206 225 Switching the measurement unit
changes it for each mode. The
201 220
POWER button can be used to
45.0 49.2
measure in each mode
See the relevant section.
8
Power off
Work Button
Angle (from horizontal)
With the POWER button depressed,
continuous measurement is possible
POWER
for up to 20 seconds.
(When done 6-3 display appears)
Repeat step 6-1.
Angle (from horizontal)
Follow by 6-5 or 6-1.
(1) Vertical separation between MODE
two points【7】
(2) Linear distance【3】 MODE
(3) Horizontal distance【4】 MODE
Height (from horizontal)【5】
(4) MODE
(5) Angle (from horizontal) MODE
Return to 6-5-(1), then repeat.
Regardless of process, after 30 seconds 30 seconds
since your last operation, power turns off. without
operation
Jp
En
Display examples
Fr
Display meter yardst
Es
Elevation (°) Depression (°)
Pt
-13
13
-5.2
5.2
blinks
206 225
201 220
45.0 49.2
-13
13
53