S&P AIRPUR-35 Instrucciones De Uso página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

ENGLISH
CONTROL PANEL
• OFF = When this button is pressed, the unit will disconnect.
• ON/SPEED = When this button is pressed, the ioniser and the fan will switch on at low spe-
ed '1'. Press it again to switch to other speed values: medium '2' and high '3'.
• TIME = Disconnection programmer (the equipment will switch off after the indicated time).
To specify the time, press the button as many times for the number of hours you want the
equipment to continue functioning (1-2-4-8 hours).
• IONISER ON/OFF = Pressing this button activates or deactivates the production of negative
ions, which offer many health benefits.
• RESET = When the 'Filter control' LED is lit, the unit has been working for 1000 hours and,
therefore, the filter needs checking or replacing. Once the filter has been replaced, press the
RESET button. The LED will switch off and the unit will reset the 1000-hour count.
MAINTENANCE
Make sure that the unit is disconnected before cleaning it or replacing the filter.
• Before replacing the filter, use a damp cloth to clean the air input grille and any other dirty
parts in the unit. Clean the motor using a dry cloth.
• Do not use solvents, alcohol or any other chemicals to clean the unit. They might damage
the plastic parts or discolour the equipment.
WARNING
For your own safety, please observe the following recommendations:
• Check that the power supply voltage matches the voltage indicated on the rating plate.
• Do not insert foreign objects inside the air purifier.
• The connections cable must be away from any heat sources such as radiators, heaters, etc.
• Do not use near baths, showers or swimming-pools.
• Do not use the purifier around oxygen leaks or flammable gases.
• If the power-supply flexible cable is damaged, it must only be replaced by one of our Official
Repairers.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido