Warranty Information
This manual provides the installation, safety and operating instructions for the Stainless steel
extractor/food blender. We recommend all installation, operating and safety instructions
appearing in this manual to be read before installation or operation.
Stainless steel extractor/food blender is a product of extensive research and field testing. The
materials used were selected for maximum durability, attractive appearance and optimum
performance. Every unit is thoroughly inspected and tested before shipment.
IMPORTANT!
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug Stainless steel extractor/food blender into a properly grounded electrical outlet of the
correct voltage, size, and plug configuration. If the plug and receptacle do not match, contact
a qualified electrician to determine the proper voltage and size, and install the proper
electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit from the power source and
allow to cool before performing any maintenance.
3.- For safe and proper operation, the unit must be located at a reasonable distance from
combustible walls and materials. If safe distances are not maintained, discoloration or
combustion could occur. Do not locate toaster under shelving or closer than 12" (31 cm)
from the ceiling.
4.- Allow a minimum of 12" (30 cm) clearance along the sides. Allow a clearance of 20" (50 cm)
along the front and rear discharge to endure proper operation and safety.
5.- To prevent any injury or damage do not pull unit by power cord.
6.- To prevent any injury, discontinue use if power cord is frayed or worn.
SPECIFICATION
MODEL:
VOLTAGE:
CYCLE:
POWER:
SIZE:
NET WEIGHT:
WORTHY INFORMATION
Keep these instructions for future reference.
WARNING
69082
200-240V
50-60Hz
800W
64x27x43 Cm.
9,5 Kgr.
19