Connecting TV
Cable System or VHF/UHF Antenna System
You can enjoy standard-definition and high-definition digital programming (if available in your area), along with standard-
definition analog programming.
This TV is capable of receiving unscrambled digital programming for both cable and external VHF/UHF antenna.
It is strongly recommended that you connect the antenna/cable input using a 75-ohm coaxial cable to receive optimum
picture quality. A 300-ohm twin lead cable can be easily affected by radio frequency interference, resulting in signal
degradation.
Cable or VHF/UHF(or VHF only)
75-ohm coaxial
cable
TUNER
High Definition Interface
You can enjoy high-definition programming by subscribing to a high-definition cable service or a high-definition satellite
service. For the best possible picture, make sure you connect this equipment to your TV via the HDMI or component
video (with audio) input on the back of your TV.
HDMI Connection
- Side
HDMI IN
HDMI
HD Multimedia Interface
rear of TV
VHF/UHF input
HDMI
HDMI
14