Removing Clogs - Kenmore Intuition BU4022 Manual De Uso

WARNING
Disconnect electrical supply before
removing clogs. Failure to do so could
result in electrical shock or personal
injury.
CHECKING FLEXIBLE HOSE FOR CLOGS
If there is noticeable abnormal noise when
using the vacuum or the suction power
suddenly drops, it is necessary to check
the air path for clogs.
Frequently check air path to make sure it is
free of obstructions.
NOTE:
The four LED lights of bag fill
level indicator flash red when the air path
is blocked.
1. Release the wand from the body and
make sure that attachments are removed
from the wand.
2. Check and remove any clogs in the
flexible hose and wand.
3. Reinstall the wand to the vacuum
cleaner. See ASSEMBLY (page 7).

REMOVING CLOGS

CHECKING CONNECTION HOSE FOR
CLOGS
To separate the body from the nozzle,
press the Lift-Up button and lift up the
body.
Wand
Release
Button
1. Check and remove any clogs in the
2. Reattach the nozzle onto the vacuum
- 23 -
connection hose.
body.
Lift-Up
Button
Connection
Hose