Intended Use - Bosch GRL 400 H Instrucciones De Funcionamiento

Maintain tools. Check for misalignment or binding
of moving parts, breakage of parts and any
other condition that may affect the operation. If
damaged, get the tool repaired before use. Many
accidents are caused by poorly maintained tools.
Use the tool, accessories, etc., in accordance with
these instructions and in the manner intended for
the particular type of tool, taking into account the
working conditions and the work to be performed.
Use of the tool for operations different from those
intended could result in a hazardous situation.
The measuring tool is intended for determining and checking precise horizontal lines.
Inserting/Replacing the Battery
ALWAYS turn off the laser tool and the main power
switch before removing and replacing the batteries.
Alkaline batteries are recommended for the tool.
To open the battery compartment 7, turn the locking
knob 8 to position
compartment.
When inserting batteries, pay attention to the correct
polarity according to the representation on the inside of
the battery compartment.
Always replace all batteries at the same time. Only use
batteries from one brand and with the identical capacity.
Shut the battery compartment 7 and turn the locking
knob 8 to the position.
Rotational Laser Level
The measuring tool is suitable for indoor and outdoor use.
and pull out the battery
Have your tool serviced by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the tool is maintained.
Develop a periodic maintenance schedule for tool.
When cleaning a tool be careful not to disassemble
any portion of the tool since internal wires may
be misplaced or pinched or may be improperly
mounted. Certain cleaning agents such as gasoline, carbon
tetrachloride, ammonia, etc. may damage plastic parts.

Intended Use

Preparation
I n c a s e t h e b a t t e r i e s h a v e b e e n i n s e r t e d
i n c o r r e c t l y , t h e m e a s u r i n g t o o l c a n n o t
be switched on. Insert the batteries with
correct polarity.
• R e m o v e t h e b a t t e r i e s f r o m t h e t o o l
when not using it for extended periods.
When storing for extended periods, the
b a t t e r i e s c a n c o r r o d e a n d d i s c h a r g e
themselves.
Low Battery Indicator
When the battery indicator 6 flashes
red for the first time, the measuring tool can still be
operated for approx. 2 h.
When the battery indicator 6 lights up red continuously,
measurements are no longer possible. The measuring
tool switches off automatically after 1 minute.
-7-
Service
SAVE THESE INSTRUCTIONS.