GE GBC12IAX Manual Del Propietario E Instalación página 12

REVERSING THE DOOR SWING
TRANSFER FREEZER DOOR HANDLE
6
Using a thin-blade screwdriver, carefully
A
remove the square button plugs from
the handle. NOTE: Be careful not to scratch
the stainless or plastic surfaces.
Remove the round button plugs on the other
B
side of the door. NOTE: Be careful not to scratch
the stainless steel surface.
C Using a Phillips screwdriver, remove the screws
from the handle.
D
Insert the round button plugs into the holes
on the hinge side of the door. NOTE: Be careful
not to scratch stainless steel.
Place the door handle over the holes
E
on the handle side of the door. Attach using
screws removed earlier.
F
Insert the square button plugs over the handle
screws. NOTE: Be careful not to scratch
stainless steel or plastic surfaces.
Square
Button
Plugs
Phillips
Screws
Installation Instructions
(cont.)
Round
Button
Plugs
12
TRANSFER FREEZER DOORSTOP
7
AND CLOSURE HINGE
A Remove the freezer doorstop from the bottom
right side of the door.
Remove the closure hinge from the bottom
B
right side of the freezer door.
Install the freezer doorstop to the bottom left
C
side of the freezer door.
Install the closure hinge on the bottom left side
D
of the freezer door.
Doorstop
Closure
Hinge
E
Using a flat-head screwdriver, remove the hole
insert from the top left side of the freezer door.
NOTE: Be careful not to scratch the stainless
steel or plastic surfaces.
F
Install the hole insert on the top right side
of the freezer door.
Hole
Insert