Installation Procedure - Toto Legato TL624DD Manual De Instrucciones Y Del Propietario

1) Insert the drain top unit into the drain
hole (see Illustration 1).
2) Assemble the flange, washer, and
flange nut (see Illustration 1).
3) Place the tail piece on the assembled
top piece and tighten the tail piece
nut until it is secure (see Illustration 1).
NOTE: Make sure that the drain cable
is facing towards the back before you
tighten the tail piece nut completely.
4) Insert the spout into the deck hole
(see Illustration 1).
5) Slide the mounting bracket onto the
spout stem followed by the mounting
nut. Tighten the mounting nut to se-
cure the assembly (see Illustration 2).
6) Connect the drain cable to the spout
(see Illustration 2).

INSTALLATION PROCEDURE

Spout and Drain Installation
4
Illustration 2
Deck Hole
Mounting
Bracket
Illustration 1
Drain Top
Unit
Gasket
Drain
Hole
Flange
Washer
Flange
Nut
Tail Piece
Nut
Tail
Piece
Spout Stem
Mounting
Nut
Drain
Cable