Battery / Fuse Replacement; Repair - Meterman AM8B Manual De Uso

Battery / Fuse Replacement

To prevent electrical shock hazard, turn off the multimeter
and any device or circuit under test and disconnect the test
leads before removing the rear cover.
1. Remove the rear case by unscrewing the screws that secure
it to the front.
2. Fuse replacement: Remove the blown fuse (5 x 20mm) from
the fuse holder. Replace with a 200 mA/250 V quick acting
fuse (Meterman PN: FP150).
3. Battery replacement: Remove the 1.5 VDC AA battery and
replace with same.
4. Reassemble the instrument.
Use of an incorrect fuse could result in serious injury or
even death. Failure to turn off the multimeter before
installing the battery could result in damage to instrument
and battery.

Repair

All test tools returned for warranty or non-warranty repair or for
calibration should be accompanied by the following: your name,
company's name, address, telephone number, and proof of
purchase. Additionally, please include a brief description of the
problem or the service requested and include the test leads with the
meter. Non-warranty repair or replacement charges should be
remitted in the form of a check, a money order, credit card with
expiration date, or a purchase order made payable to Meterman Test
Tools.
In-Warranty Repairs and Replacement – All Countries
Please read the warranty statement and check your battery before
requesting repair. During the warranty period any defective test tool
can be returned to your Meterman Test Tools distributor for an
exchange for the same or like product. Please check the "Where to
Buy" section on
distributors near you. Additionally, in the United States and Canada
In-Warranty repair and replacement units can also be sent to a
Meterman Test Tools Service Center (see below for address).
W Warning
W Warning
www.metermantesttools.com
5
for a list of