WARRANTY
The TRH22 Humidity Temperature Meter is warranted against any
defects of material or workmanship within a period of one (1) year
following the date of purchase of the meter by the original purchaser or
original user. Any meter claimed to be defective during the warranty
period should be returned with proof of purchase to an authorized
Meterman Test Tools Service Center or to the local Meterman Test
Tools dealer or distributor where your meter was purchased. See
Repair section for details. Any implied warranties arising out of the sale
of a Meterman Test Tools meter, including but not limited to implied
warranties of merchantability and fitness for a particular purpose, are
limited in duration to the above stated one (1) year period. Meterman
Test Tools shall not be liable for loss of use of the meter or other
incidental or consequential damages, expenses, or economical loss or
for any claim or claims for such damage, expenses or economical loss.
Some states do not allow limitations on how long implied warranties
last or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
Specifications
Display: Dual display
Measurement Range
Humidity: 0% RH to 100% RH
Temperature: -20 °C to 60 °C (-4 °F to 140 °F)
Accuracy (at 23°C ± 5°C)
Range
5% RH to 95% RH
-20°C to 60°C
-4°F to 140°F
Resolution: 0.1%RH , 0.1°C / 0.1°F
Response Time (@ t90; in slowly moving air)
Humidity: 180 sec
Temperature: 10 sec
Operating Conditions: 0°C to 40°C; <80% RH
Storage Conditions: -10°C to 60°C; <70% RH
Altitude: Up to 2000 meters.
Sample Rate: 2.5 times per second
Battery: 9 V Battery, NEDA 1604 or JIS 006P or IEC6F22
Battery Life: 85-hours continuous; (with alkaline battery)
Dimension: 240x54x34 mm (9.5x2.1x1.3 in)
Weight: Approx.180g (6.4 oz.)
Accessories: Battery, instruction manual
Accuracy
±3% RH
±0.8°C
±1.6°F
7