Decommissioning; Disassemble Sliding Bracket; Disposal - Haaga 375 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 73

Decommissioning

10. Decommissioning
10.1 Disassemble sliding bracket
CAUTION
Risk of injury through tipping over of the
EN
sliding bracket!
Tipping over of the sliding bracket may lead to
slight injuries, such as jamming of the finger or
haematomas in users or other persons.
• When carrying the device, hold it so that the
sliding bracket cannot tip over.
Fig. 13: Sliding bracket disassembly (haaga
375)
1. Bring the sliding bracket (2) into the vertical
position.
2. Press the lock springs (3) inwards on both
sides, so that the sliding bracket (2) is
released for removal.
3. Pull the sliding bracket (2) out of both handle
fittings (1) simultaneously.
30
haaga 477 / 497 Profi
2
3
1
haaga 375
2
Fig. 14: Sliding bracket disassembly (haaga
477 / 497 Profi)
1. Bring the respective arrows on the housing to
the bar of the handle fittings (1).
2. Position yourself between the sliding bracket
in front of the device.
3. Grip both handle fittings (1) with your hands
and carefully push them out.
4. At the same time pull out the handle fittings
from both receptacles of the device.

10.2 Disposal

• Dispose of the device in an environmentally
friendly manner in accordance with the
applicable regional regulations.
1

Publicidad

Tabla de contenido
loading

Productos relacionados para Haaga 375

Este manual también es adecuado para:

477 profi497 profi

Tabla de contenido