Delta Q QOOL EVOLUTION Manual De Instrucciones página 20

A. B.
A. B.
Fig. 18: Programming the coffee
extraction button.
Programming the coffee extraction button.
Note: The pre-defined factory volume for the coffee extraction
button is around 45cc.
• T o alter the volume of your beverage, ensure the machine is ON (see
Fig.5), check whether there is any water in the water tank and
wait until the control panel buttons indicate "Ready to use"
(see Fig. 7).
• Then press the coffee extraction button until the indicator lights
of the espresso and the tea extraction buttons start blinking.
Press the coffee extraction button (see Fig. 18).
C.
The indicator lights of the espresso and the tea extraction
buttons go out.
Note: If the user does not press again the coffee extraction button
C.
after 1 minute, the equipment will revert automatically to the
"Ready to use" mode.
• As soon as extraction has reached the desired dosage, press the
coffee extraction button again and the operation is complete.
The equipment memorises this volume and will start extracting
it until new programming has been defined.
• After completing extraction, the equipment returns to "Ready
to use" mode (see Fig. 7).
Note: If the user fails to press the extraction button to complete
the operation, the equipment will automatically assume the
maximum volume of 75cc.
QOOL
19