Assembly - Easy Home VC9389 Manual Del Usuario

Assembly

1. Unpack the Carpet Cleaner from the box.
2. Remove any unwanted packaging materials such as cardboard, plastics or
styrofoam.
3. Check that all accessories are complete, and unit is not damaged.
4. For packaging purposes, the handle is packed uninstalled to the Carpet
Cleaner.
5. Set the Carpet Cleaner in an upright position.
Place the handle firmly on the main body. Make
sure, that the power cord clip is on the same side
as the power cord hooks.
6. Using a Philips-head screw driver, tighten one
screw on each side of the handle until tight. Do
not overtighten the screws, this could strip the
screw holes. Do not plug in or operate the Carpet
Cleaner without the handle fully attached.
DO NOT USE ANY ABRASIVE MATERIAL TO CLEAN THE SURFACE
DO NOT IMMERSE THE CARPET CLEANER INTO WATER AT ANY TIME
4
Assembly